#Electribe 2 sampler install

We found it helpful to apply a short strip of masking tape along the top of the synthesizer to use as a guide when installing the top row of stickers (see video for a demonstration of this). Then, simply peel off each label from the backing and place them onto your synthesizer.

#Electribe 2 sampler install

To install the stickers, first remove the nine small-sized knobs in the second row on the front panel of your Electribe 2. You may also want to wash your hands with soap and water before installing the overlay to prevent getting oils or debris on the adhesive. If your synthesizerВ is very dirty, you may want to clean it with a soft cloth or an isopropyl alcohol wipe before installing the overlay. In our testing, we did not notice any damage to our synthesizers however your results may vary. Unfortunately, we cannot guarantee that these labels will not damage the original finish or labeling on your synthesizer. The adhesive is moderate-tack, so the labels should stay securely in place, and can be easily removed. These sticker labels use an adhesive backing. When properly installed the sticker labels will not interfere with any of the synthesizerвЂ™s functions. These stickers have a glossy topcoat lamination in order to improve contrast and provide physical protection for the printed labeling. The background colors (Grey, Black, Blue, or Red) are intended to match as close as possible to the colors on the respective machines, however since these are printed stickers as opposed to painted metal, the color will not match exactly in all lighting. In addition, shift functions are shown next to the corresponding buttons and controls. These labels use high contrast printing and large fonts to provide better readability, especially in low light compared with the original front panel labeling on the Electribe 2 machines.

The synthesizer labels come with an вЂњOscillatorвЂќ label and the sampler labels come with a вЂњSampleвЂќ label for the oscillator knob. Note: Please select the color (grey, black, blue, or red) and Electribe 2 model (synthesizer or sampler) when ordering. This product is a sheet of adhesive-backed Shift-Function and High Visibility labels that you apply to your Electribe 2 Synth or Sampler.